The wide variety of float weights and meter tubes allows the Glass Tube Flowmeter FGM1190 to be matched exactly to the required flow range.
The bead design is the standard meter tube design in sizes 1/16" to 2".
The three ribs, which are parallel to the center axis of the meter tube, guide the float over the entire flow range.
This assures a high degree of reproducibility because the float is absolutely centered in the meter tube
.Stainless steel housing is standard
Safety protection tube to protect the user should the meter tube burst
O-Ring seals for the meter tube
Alarms: Min., Max., Min. and Max.
Numerous flow ranges
Scale Formats: Diameter Ratio Scale Dt/Df: For meter sizes 1/16” to 1/4”, direct reading upon request, Percent Scale: For meter sizes 1/2” to 2”, direct reading or mm scale upon request
Scale Length: 100 mm for Meter Tube Size 1/16”, 130 mm for Meter Tube Size 1/8” to 1/4”, 250 mm for Meter Tube Size 1/2” to 2”
Accuracy Class (per VDI/VDE 3513): Meter Tube Size 1/16”: 6, Meter Tube Size 1/8” to 2”: 1.6, Meter Tube Size 1/2” to 2” with float type “BL”: 6
Connections: Threaded or flanged connections
Max. Ambient Temperature Liquids: -40 °C to +60 °C, Gases: -40 °C to +40 °C
Aeration
Gas sampling systems
Burner control
Level measurement
Purging applications
Nitrogen generators
Corrosive liquids
Food and beverage applications
FAM3200 (Series 10A3200)
Variable Area Flowmeter VA Master FAM540
Variable Area Flowmeter VA Master FAM540
Variable Area Flowmeter VA Master FAM540
Variable Area Flowmeter VA Master FAM540
Variable Area Flowmeter VA Master FAM540Variable Area Flow Meters
Variable Area Flow Meters
Variable Area Flow Meters