The flowmeter operation is based on the variable area principle.
They can be utilized for measuring the flow of liquids, steam and gases, especially when aggressive or opaque fluids are to be metered.
They are indispensable where high pressure and/or high temperature operating conditions exist.
The stainless steel primaries as well as the PTFE liner primaries are proven in many applications even under hardest conditions.
All devices are available as analog indicator with or without alarms as well as electronic transmitter with 4-20 mA , HART and NAMUR contact outputs and optionally with a graphical display.
They can be used in all hazardous areas in flameproof, intrinsic safety or non sparking design.
Design: Hygienic
Measured value error: 1.6 % qg = 50 % VDE / VDI 3513
Reproducibility: 0.25 % of measured value
Process connection: Thread DIN 11851, SMS 1145
Connection meter sizes: DN 25 (1“) ... DN 100 (4")
Max. temperature of measured medium : 140 °C (284 °F)
Max. Pressure rating: PN 40
Materials in contact with fluid: Stainless steel 1.4404 (316L) ,1.4571 (316Ti)
Meter housing: Stainless steel 1.4404 (316L)
Gaskets: Viton A (DN 25 only)
Accuracy: 1.6 % qg = 50 % acc. to VDE / VDI 3513, sheet 2, optional 1 % of end value
Deionization
Water purification
Waste water treatment
Gas sampling systems
Nitrogen generators
Power utility applications
Cooling water
Burner control
Corrosive liquids
Chemical injection
Food and beverage applications
FAM3200 (Series 10A3200)
Variable Area Flowmeter VA Master FAM540
Variable Area Flowmeter VA Master FAM540Variable Area Flowmeter VA Master FAM540
Variable Area Flowmeter VA Master FAM540
Variable Area Flowmeter VA Master FAM540
Variable Area Flow Meters
Variable Area Flow Meters
Variable Area Flow Meters