The AT500 Magnetostrictive Transmitter is based on the Same Magnetostrictive Principle as the AT100 Model.
The AT500 is a Compact Magnetostrictive Liquid Level Transmitter for Direct Insertion for Total and Interface Measurement.
Mounts from Top of Tank
High Resolution 4-20 mA Output
Simple Mounting and installation
Very Compact Design
Calibrates Without Opening Enclosure
Stainless Steel Enclosure
Custom Floats Available
Measurement of Total or Interface Level
Repeatability: .01% of full scale or 0.030”, whichever is greater
Non-Linearity: 02% of full scale or .07”, whichever is greater
Accuracy: .02% of full scale or .10”, whichever is greater
Loop Supply Voltage: 13.5 to 36 VDC
Housing type: Explosion Proof 316L Stainless Steel
Electrical Connection: 1/2” FNPT,M20 Optional
Reverse Polarity Protection: Diode in series with loop
Output/Communications: Standard 4-20 mA, Calibration via magnets
Failsafe: Field Selectable: Upscale or Downscale
Operating Temperature: -40 to 170ºF (-40 to 77ºC) Ambient
Humidity: 0 to 100% R.H., non-condensing
Enclosure Rating: IP67
Oil and Gas Industries
Petrochemical Industries
Chemical Industries
Power Generation Industries
Water and wastewater treatment
Food and Beverage Industries
Pharmaceutical Industries
Pulp and Paper Industries
Biotech Industries
Marine Industries
Magnetostrictive Liquid Level Transmitter
Sanitary Magnetostrictive Level Transmitter
Magnetostrictive Level TransmitterCompact Magnetostrictive Liquid Level Transmitter for Direct Insertion
Compact Magnetostrictive Level Transmitter
Level Sensors
Level Sensors