Accutech Middle East FZCO

Dubai Silicon Oasis

sales@accutech.ae

Office Hour : 8:30 AM - 5:30 PM

Home / Products

Buoyancy Level Switches

Extended body horizontal electric level displacer switch

  • General purpose horizontally mounted, displacer level switch
  • Model No. : MS8D
  • Brand : ABB
Datasheet

The MS8D is a single-pole, double-throw electric switch capable of sensing high or low liquid level inside a process vessel.

This switch has a stainless steel housing and is hermetically sealed and requires no maintenance

The MS8D can provide either a normally open or normally closed dry contact to activate external devices such as alarms or solenoids

Variations in process fluid specific gravity have minimal effect on the level measured because of the small size of the integral polypropylene displacer.

Electrical Contacts are Magnetically Isolated from Process Polypropylene Displacer for High Pressure

Applications Mounting Via 1” NPT Process Connection Optional Flange Mounting Adapters Available Hermetically Sealed SPDT Switch (NO / NC Contact) Vibration Resistant Switch is Totally Enclosed within Stainless Steel

Housing (Flying Leads) Hex Shaped Housing & SPDT Contacts Allow for Easy

Installation Designed & Constructed to FM, UL, NEMA & ANSI/ISA Guidelines Two Standard QuikShip Models with Various Custom Designs Available

Switch Type: Magnetically actuated, hermetically sealed bistable switch, SPDT, Form C

Contact Material: Rhodium Alloy

Switch Action: Break before make

Contact Ratings: AC Ratings: 100 VAC, 1 Amp, 100 VA, resistive DC Rating: 100 VDC, 1 Amp, 100 W, resistive (if higher contact ratings are required, see IR10 & PP10 Data Sheets)

Process Temperature: -40 to 180°F / -40 to 82°C

Maximum Pressure: 2500 psig @ 180°F / 172 bar @ 82°C

Connections: 1” MNPT Process, 1/2” FNPT Conduit & AWG 20 Wiring Harness (18 inch); MS8D Housing is 1¾” Hex for tightening into process connection.

Insertion Length: 9 in. / 229 mm Standard; Optional lengths to 24 in. / 610 mm available

Materials: Polypropylene Displacer; Other Wetted Parts 316 SS

Specific Gravity: 0.6 Minimum (Clean Fluids) Approvals General Purpose Only

Application Pending

Related Products