The MS50 is used for top of tank mounting.
The MS50 has a 316SS float, 316SS rigid float and two switches for high and low detection.
Typical applications where the MS50 is used are butane, propane, oil, chlorine, acids, water and interfaces.
Up to six SPDT switches per unit (NO & NC Contacts)
Interface & total level capability
Trip point adjustable without removing vessel from service
Vibration resistant (Multi-Float option only)
Suitable for high temperature applications
316L stainless steel wetted parts standard
Field adjustable and replaceable switche
s316/316L standard, exotic alloys & thermoplastic available
Terminal block(s) included
Mechanical:
Housing Type: Explosion Proof Powder Coated Aluminum Compartment IP 67
Materials of Construction 316L Stainless Steel Standard, Exotic Alloys, Thermoplastic Optional
Maximum Pressure: Metallic Units: 800 psig @ 300ºF / 55 bar @ 149ºC Thermoplastic: 50 psig / 3.5 bar at maximum temperature listed
Sensor: 5/8” OD / 16 mm
Length: Metallic Units: 8 inches to 20 feet / 0.2 to 6 meters Thermoplastic: 8 inches to 10 feet / 0.2 to 3 meters
Electrical
Switch Type Magnetically actuated, hermetically sealed, reed switch Each contact, single pole double throw (Form C)
Switch Action: Break before make
Contact Material: Rhodium
Maximum Deadband: Approximately ± 0.75 in/1.9 cm of float travel
Contact Ratings: AC rating (max): 250 V or 1 amp resistive or 100 VA DC rating (max): 125 V or 0.5 amp resistive or 100 W Lamp Load Rating: 1/3 A @ 125 VAC
Ambient Operating Temperature Range: -58ºF/ -55ºC to 150ºF/ 66ºC
Minimum Operating Process Temperature: Metallic Units: -50ºF/ -45ºC Thermoplastic Units: 40ºF / 4.5ºC
Maximum Operating Process Temperature: Metallic Units: 200ºF / 93ºC (optional 302ºF / 149ºC) Thermoplastic Units: PVC: 140ºF / 60ºC; CPVC: 210ºF / 99ºC; PVDF: 280ºF / 138ºC (see /HT option)
Butane, Propane, oil, Chlorine, Acids, Water and interfaces