The MT5200 Measures the Level of Bulk Solids Under the Harshest of Conditions with an Industry-Leading Accuracy of ±0.20 inches (5.1 mm).
K-TEK's MT5200 Overcomes the False Echoes and Complicated Set-Up Normally Associated with Conventional Non-Contact Radar Level Transmitters, while Providing Accurate Height Measurements Even Under the Harshest Conditions, Wide Variations in Operating Temperatures and Pressures and Low Dielectric Constants.
The MT5200 Brings the Benefits of Radar Level Measurement to an Expanded Range of Industries that Seek an Accurate Solution to Measuring the Contents of Tanks, Silos, Hoppers, Bins, Mixing Basins, and Sumps.
Graphic Display with Waveform Screens
All Digital Electronics
Radar Signal Travels Along the Waveguide Eliminates False Echoes and Minimizes Signal Loss
No Moving Parts
2 Wire Loop Powered
Linearization Table
Lengths From 1 to 100 ft. / 0.3 to 30.6 m
Flexible Cable Probes
Housing: Dual Compartment Powder Coated Aluminum or Stainless Steel
Electrical Connection: 1/2” FNPT or M20
Power: 13.5 – 36 VDC, Standard; 9-32 VDC Foundation Fieldbus; 10 - 18 VDC MODBUS
Wiring: Standard and Foundation Fieldbus - 2 wire MODBUS - 4 wire plus shield (2 power, 2 data- half duplex)
Output: Single 4-20 mA, HART, Foundation Fieldbus (ITK 5.0.1), MODBUS (RTU or ASCII),
Graphic Display: Field Selectable Units in Feet, Inches, Millimeters, Centimeters, Meters or Percentage and Waveform Screens
Accuracy: +/- 0.20 in / 5.1mm Direct mode, +/- 1.00 in / 25.4 mm ULD mode
Resolution: +/- 0.063 in / 1.6 mm
Repeatability: 0.1 in. / 3 mm
Range: 1 to 100 ft. / 0.3 to 30.6 meters
Process Pressure: Up to 1500 psi (103 bar)
Process Temperature: Up to 400°F (204°C)
Oil and Gas Industries
Refining
Chemical Industries
Power Generation Industries
Water and wastewater treatment
Food and Beverage Industries
Pharmaceutical Industries
Pulp and Paper Industries
Biotech Industries
Marine Industries