The concentration of the various ingredients is controlled by a PLC, frequency converters and flowmeters that regulate the pumps.
Valves allow the product to pass to the production line or to drain.
The valves required are automated butterfly valves with pneumatic actuator and C-TOP control unit.
The system is supplied with a tank for preservatives.
As an option, a pH meter can be installed to control the concentration of the preservative and desinfectant
The performance range is from 4000 up to 10000 kg/h.
A conductivity tester after the mixer controls if the product is correct or not.
Production unit for up to 10.000 kg/h of Sodium Laureth Sulfate (26%).
For the network water: Kiber KS40 pump, 2,2 kW, 352 rpm at 50 Hz.
Kiber KS 40 pump, 4 kW, 200 rpm at 50 Hz.
Mass flowmeters:Multitooth mixer ME 892X of 9,2 kW and 5000 rpm.
Butterfly valves with single-acting pneumatic actuators with C-TOP control unit.
Dosing piston pumps for preservatives.
Parts in contact with the media: AISI 316 L
Other metallic parts and control panel: AISI 304
Stators of the progressive cavity pumps: black NBR according to FDA
Mechanical seal of the pump: C/Cer/NBR
Mechanical seal of the multitooth mixer: C/SiC/EPDM
Gaskets in contact with the media: EPDM (FDA)
Surface finish: Ra ≤ 0,8 μm
Production unit for up to 10.000 kg/h of Sodium Laureth Sulfate (26%).
For the network water: Kiber KS40 pump, 2,2 kW, 352 rpm at 50 Hz.
Kiber KS 40 pump, 4 kW, 200 rpm at 50 Hz.
Mass flowmeters.
Multitooth mixer: ME 892X of 9,2 kW and 5000 rpm.
Butterfly valves with single-acting pneumatic actuators with C-TOP control unit.
Dosing piston pumps for preservatives.
Agitation Systems with Column
Table Blender MM
Automated Table Blender
Table Blender for Viscous Products
Double Cone Solids Blender
V-Type Solids Blender
Solid-Liquid Mixing 
Mixing of Low Viscous ProductsDilution System 