The table blender is a compact unit, it consists of a centrifugal pump with a venturi system at the suction side and a hopper with a butterfly valve at the upper part to add solid product to the pumped liquid.
In this blender, the suction and ventury system are set horizontally.
The ventury system and the suction of the pump create depression at the base of the hopper.
When the valve of the hopper opens, the solids are drawn from the hopper and are totally dissolved when they pass through the casing of the pump.
To achieve the best possible dissolution, it is recommended to recirculate the product (batch production) till all the solid/powder product is suctioned and then, when the solid product is completely incorporated into the liquid product, continue recirculating the product for a while.
In some cases, it can be used in-line depending on the solid product to add and the required level of dissolution.
Very simple and versatile equipment for a fast and homogeneous mixing of a wide range of solid products without any contact with atmosphere.
Hygienic design.
ISO 2852 Clamp connections for easy assembly/disassembly.
Cleaning and disinfection without disassembling the unit.
St.St. control panel with Stop/Start button and motor protection.
Skid with wheels: 2 rotating + 2 fixed with brakes.
Complete mixing with recirculation.
Possible in-line mixing without recirculation for some applications.
Optional in-line mixer for total dissolution of possible lumps in the end product.
A table for bags at adequate height facilitates manual feeding.
Parts in contact with the product: AISI 316L
Other metal parts: AISI 304
Gaskets: EPDM according to FDA
Mechanical seal: C / SiC / EPDM
Internal surface finish and hopper bright polish: Ra ≤ 0.8 μm
Frame surface finish and upper base: mat finish
MM200
Flow rate approx: 20 m³/h
Differential height max: 7 mwc
Suction of solids max: 1300 kg/h *
Motor: 3 kW - 3000 rpm
Max.temperature: 65ºC
Connections: (inlet/outlet) CLAMP
Hopper capacity: 45 L
Hopper valve: CLAMP butterfly valve
MM260
Flow rate approx: 40 m³/h
Differential height max: 15 mwc
Suction of solids max: 2000 kg/h *
Motor: 5.5 kW - 3000 rpm
Max.temperature: 65ºC
Connections: (inlet/outlet) CLAMP
Hopper capacity: 45 L
Hopper valve: CLAMP butterfly valve
MM380
Flow rate approx: 90 m³/h
Differential height max: 25 mwc
Suction of solids max: 13000 kg/h *
Motor: 18.5 kW - 3000 rpm
Max.temperature: 65ºC
Connections: (inlet/outlet) CLAMP
Hopper capacity: 75 L
Hopper valve: CLAMP butterfly valve
Agitation Systems with ColumnTable Blender MM
Automated Table Blender
Table Blender for Viscous Products
Double Cone Solids Blender
V-Type Solids Blender
Solid-Liquid Mixing 
Mixing of Low Viscous Products
Dilution System 