Areas of application: With its high accuracy and control stability, the CPC8000-H hydraulic high-pressure controller is particularly suitable as a factory/working standard for the automatic testing and/or calibration of high-pressure measuring instruments of any kind

As a result of its robustness and reliability, further perfect applications are autofrettage tasks or cyclic pressure load tests

To operate the controller, apart from the electrical supply, only clean, dry compressed air is needed for the pneumatic control circuit. As a fluid media on the output side, either hydraulic oil or water can be used. On request different media are also available.

Functionality: Due to its special technology, pressure set-points within the controller are controlled quickly and smoothly

The set-point can be entered directly via the user-friendly keypad or can be transmitted through the controller‘s digital interface.

Apart from the input of a defined set value via the keypad, the pressure can also be raised or lowered incrementally by means of programmable STEP and JOG buttons.

The high-definition TFT colour display has been designed to be particularly clear, allowing up to 4 windows to be viewed at any one time, as well as various functions, such as min, max, etc., to be activated.

Communication interface: For communication and/or data exchange with a PC, the instrument has an RS-232 and an IEEE-488.2 interface

These digital interfaces enable software-controlled operation of the controller, e.g. fully-automatic calibration procedures or the execution of special test routines, which can be generated through programs such as LabVIEW®, etc..

Complete test and calibration systems: If required, customer-specific test facilities and/or turnkey systems, including software, can also be manufactured.

Calibration certificates: The accuracy of the equipment is certified by a factory calibration certificate.

If desired a DKD Calibration Certificate can also be provided for the equipment using our own DKD laboratory.